Edge Pro

EP-600_UF_D

Edge Pro 600 Grit Extra Fine Water Stone

19 items left

Add this to your Apex kit if you want a more polished edge, as is popular with many Japanese knives and thinner knives such as utility knives, slicers and carving knives. Not normally used with knives that have a softer metal (the edge will just be too weak) or with knives where you want more "bite" (like boning knives and many all-around knives like santokus and chef's knives). Comes pre-mounted on an aluminum plate ready for use in your Edge Pro Apex system.

Dimensions: 6" x 1" x approx. 1/8" thick (stone is approx. 1/8" thick, total thickness including base plate = approx. 1/4")

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Andre
Excellent sharpening products

Excellent product and service. Very fast delivery.

E
E.
Great finish stone for many knives

This stone is what I finish most of my kitchen knives at for a slicier edge than the 400 grit stone. It removes metal at a decent rate and seems to be quite hard and will last a long time. If you are sharpening lower quality softer "stainless" steel knives this is probably as high as you want to go. The steel on those generally needs the tooth of this or the 400 grit to perform well or you could end up with a "sharp" knife that glides over things like tomatoes instead of cutting into them.

My stone came in between 3.15mm and 3.3mm end to end, the farthest from flat stone I received when I bought the full set. This is stone (and the 1,000) are thinner than the 120, 220, and 400 grit stones, and all are thinner than what has become standard of 6mm for this format of stone.

T
Thomas Bates
600 grit EP stone

I’ve bought this a few times. It’s always been dead flat out of the box and performed consistently. It’s a pretty fast cutting stone for how fine it is. This is what I finish my soft stainless knives on

Sign up for our Newsletter & Save!